A 700 MSM - stone mill - combi mill
from the state government
germany
| Dimensions in cm L/W/H: | 250 / 120 / 220 |
| Weight: | 780 kg |
| Hopper volume: | 80 kg |
| Capacity of the mill /h: | ca. 70–135 kg |
| Millstones: | certified millstones |
| Voltage: | 230 / 400 V |
| Frequency: | 50 Hz |
| Rev. per minute: | 150 - 400 rpm |
- Casing and built-in sieve from genuine pine wood.
- The quantity of grain into the hopper is adjustable by the small cogwheel under the hopper. The fineness of the flour can be altered by a wheel by hand.
- Sight glass in the hopper.
- Magnetic trap captures the small ferrous particles.
- 3 chambers in the sieve with 6 sets of sieves to change gives the chance to produce various type of flour in one operation.
- Due to the low revolutions of the stones, the mill is suitable for continuous operation.
- Specially cut stones guarantee the best quality of the flour (devel. by Green).
- Optional equipment: the mill stops working when the hopper is empty.
- The stone mill is ideal for grinding any type of grain, rice, corn, chestnuts, herbs, etc.
- Easy to clean
-
Interior fittings sifter box made of stainless steel
- Easy to clean
- Frame inside and the interior of the funnal in STAINLESS STEEL
Trophy for quality
A 700 MSM S2 - stone mill - combi mill (2 outlets for flour)
| Dimensions in cm L/W/H: | 250 / 120 / 220 |
| Weight: | 780 kg |
| Hopper volume: | 80 kg |
| Capacity of the mill /h: | ca. 70–135 kg |
| Millstones: | certified millstones |
| Voltage: | 230 / 400 V |
| Frequency: | 50 Hz |
| Rev. per minute: | 150 - 400 rpm |
- Casing and built-in sieve from genuine pine wood.
- The quantity of grain into the hopper is adjustable by the small cogwheel under the hopper. The fineness of the flour can be altered by a wheel by hand.
- Sight glass in the hopper.
- Magnetic trap captures the small ferrous particles.
- 3 chambers in the sieve with 6 sets of sieves to change gives the chance to produce various type of flour in one operation.
- Due to the low revolutions of the stones, the mill is suitable for continuous operation.
- Specially cut stones guarantee the best quality of the flour (devel. by Green).
- Optional equipment: the mill stops working when the hopper is empty.
- The stone mill is ideal for grinding any type of grain, rice, corn, chestnuts, herbs, etc.
- Easy to clean
- Frame inside and the interior of the funnal in STAINLESS STEEL
Mill plant A 700 - A 1000 - A 1200 - A 1600 with transport pneumatic
Mill plant A 700 - A 1000 – A 1200 – A 1600
Plant with transport pneumatic
With the pneumatic air conveyor system the mill keeps clean and the flour keeps cold!
30% more hourly capacity
All our mills are low speed - slowly runners - this is very important for flour quality!
Interior fittings sifter box partly made of stainless steel
Important! – Windows in the sifter to check inside!
hourly capacity: ca. 170- 500 kg ca. 330 – 1100 lbs
Frame inside and the interior of the funnel made of stainless steel
In the past 20 years almost all of our mill-plants were delivered with the proven pneumatic air conveyor system. The air stream is cooling down the flour in the transport pipes on the one hand, and has also a positive cooling effect on the mill-stones on the other, resulting in an increase of output up to 30 %!
Furthermore, the pneumatic air conveyor system guarantees a constant flow volume of the flour from the mill into the sifting machine. and therefore starve feeding resp. over feeding of the sifter machine can be 100 per cent ruled out, but which could happen because of a varying filling level in a conveyor screw.
Videos
Osttiroler Getreidemühlen | Heidi Green | A-9991 Doelsach, Muehlenstrasse 2
Tel: +43 (0)4852 61061 | E-Mail: og@getreidemuehlen.com | Contact: Contact |
